Servo motor 750W 599€ for automatic industriel sewing machine thread trimmer auto foot li4

Note:
This motor is complex to setup. It is intented for sewing machine professionals.
There is no support and no waranty.
Documentation is in English.

Servo Motor for automatic industrial sewing machine

this servo motor will replace your Efka DC 1550 series

This engine takes the characteristics of the SM750P with the following differences

* 750w power
* management of the thread trimmer
* automatic reverse management
* automatic break point management
* automatic presser foot management
* management of the position of the needle by positioner


Example of functions on the control panel
* breakpoint yes / no
* needle position up / down
* 16 selections of constant stitch length
* reinforcement seam
* selection cut wire or not
* management of the different positions of the pedal and associated functions
* management of sewing speed
* management of the various parameters
* consumed thread length counter

Example of programmable function in advanced mode
* slow start from 0 to 9 points
* cutting speed wire
* lifting of the foot after wire cutting
* max speed
* breakpoint speed at the beginning of sewing
* lifting of the foot
* end stitch breakpoint speed

Other features of the SM550FA

Last generation engine to give new life to your machine.

The system is suitable for industrial machines such as Pfaff, Adler, Durkopp, Mitsubishi, Juki, Pegasus, Singer, Brother, etc. 10mm wide and can accept a width between 8 and 13 mm.

Thank you for giving me the type of machine you use.



• Powerful 750W motor, quiet, vibration-free
• Flexible with programmable speeds from 100 to 3500 rpm
• Mastery of half-point in half-point when necessary
• Saves up to 72% electricity / clutch motor.
• 45% productivity. The position of the needle is programmable at the time of stopping, by default, at the bottom to resume and reposition the fabric while keeping it centered by the needle, at the top end of seam by heeling the pedal. ... big time saver!

Stable, reliable and safe. Input voltage range from 180 to 260v, Life Cycle ≥25,000 h, Compatible with 12v -> 220v generator sets and converters

Great mastery at low speeds, one point at a time, for precise seams in leather and other materials where error is not allowed, on the other hand, high speed for fast sewing.

This motor adapts very well to the table of your machine and its assembly is simple as a breeze.

Compatible with industrial sewing machines, here is a list of non-exhaustive models

Motor of the same type as those found on automatic machines.

For industrial or professional machine Single double or triple drive serger overlap
Pfaff 1245 138 238 463 563 335 545 145
Adler 67 167 267 etc ...
Juki Singer Pegasus Brother Global Lewis Meyer Fox

The photos are representative of the delivered material: mounting screw, positioner, circuit breaker switch, block-block, pedal linkage, etc.

French manual.
Comes complete with control panel

Weight 8kg